Top 10 common forklift crashes ， forklift operation must pay attention to these matters ！.

Top 10 common forklift crashes ， forklift operation must pay attention to these matters ！.

Blog Article

Do not take too lightly the forklift at the workplace. If the operation is not good, there will be significant crashes in minutes, and there are many mishaps involving forklifts.

Case 1: The forklift cargo blocked the driver's view, and the individual in front could not be found, resulting in a rolling mishap.
Instance 2: In order to maintain the balance of the forklift when raising hefty products, the staff members used their body weight as the weight, which nearly caused casualties.
Situation 3: The width of the forklift cargo surpasses the permitted size of the path and holds on the roadside shelf, which virtually creates an accident.
Case 4: Forklift is speeding up and surrender throughout a turn.
Situation 5: The forklift driver did not notice the pedestrian, and the pedestrian did not observe the forklift.
Instance 6: The forklift raises the workers unlawfully, the forklift chauffeur does not use the safety belt, the forklift lifter falls and the chauffeur is squashed when the forklift surrender.
Case 7: The forklift driver did not use a seat belt and dropped from the lorry when it surrendered and was crushed.
Forklift operation ought to take notice of these matters ：.

Begin.
1. Before beginning, observe the environments, and after validating that there are no barriers that hinder the safety and security of driving, honk the horn first and then begin.
2. For lorries with hydraulic (air pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) scale should be secure prior to starting.
3. When the forklift begins with a tons, the motorist needs to initially verify that the tons is steady and trustworthy.
4. The start has to be sluggish and consistent.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground should be kept at 300mm-400mm, and the mast should be slanted in reverse. .
2. Do not raise the fork too high when driving. When getting in and leaving the task site or while driving, be careful that there will be no barriers overhead. When the tons is taking a trip, the fork has to not be elevated expensive, which will impact the security of the forklift. .
3. After dumping, the fork must be lowered to the regular driving placement before driving. .
4. When turning, if there are pedestrians or cars close by, the driving signal should be issued first. High-speed sharp turns are banned. High-speed sharp turns will cause the lorry to shed side stability and topple. .
5. When the forklift is downhill, it is strictly restricted to shut off the fire and slide, and it is forbidden to brake unexpectedly while driving with lots unless there are special conditions.
6. When the forklift is running, it should comply with the web traffic rules in the manufacturing facility and have to maintain a particular safety distance from the automobile in front. .
7. When the forklift is running, the lots should be in the lowest setting that does not hinder the driving, and the gantry should be appropriately slanted back. The load will not be increased other than when stacking or loading. .
8. The elevation of the lots need to not obstruct the driver's sight. In special conditions, when the thing affects the forward vision, drive at a low speed when turning around.
9. It is prohibited to activate the ramp, neither to drive across the ramp. .
10. The risk-free driving rate of the forklift in the factory location is 5 km/h, and it needs to drive securely at a reduced rate when entering the manufacturing workshop location. .
11. When the forklift is raised, lifted or driven, it is prohibited for employees to depend on the fork to hold items and play a balancing role. .
12. If troubles are discovered, they will certainly be fixed and reported in a prompt way, and they will certainly never ever operate with ailments or hide them.

filling and unloading.
1. When fork-loading items, the distance between the two forks need to be changed as needed to make the load of both forks balanced and not skewed, and one side of the thing should protest the rack. .
2. It is forbidden to deal with a single fork or make use of a fork top or pull. In unique circumstances, safety and security warning signs should be set up to advise bordering pedestrians. .
3. In the process of filling and unloading products, the forklift needs to be stopped with the brake. .
4. The rate of the car should be sluggish and stable. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled items and harm individuals. .
5. When making use of a fork to fork the goods, the fork ought to be as deep as feasible under the tons, and it needs to be kept in mind that the fork pointer should not touch various other goods or objects. The tons needs to be supported with very little back tilt of the gantry to ensure that the lots does not move in reverse. The pole can be tilted forward a little when the lots is decreased to allow for easy placement of the tons and removal of the forks. .
6. It is forbidden to fork goods at high speed and collide with hard items with the fork head. .
7. When the forklift is functioning, it is prohibited for people to stand around the fork, so regarding prevent the collapse of the goods and hurt people. .
8. Straining is banned, and it is forbidden to utilize forks to raise workers to engage in high-altitude procedures to stay clear of high-altitude dropping crashes. .
9. It is not allowed to use the brake inertia to slide, place, round or roll items. .
10. It is not allowed to utilize forks to pick, turn pallet dump.

Leaving .
1. It is restricted to leave the forklift when the items on the fork impend. Prior to leaving the forklift, you have to unload the goods or reduced the fork framework.
2. Pull the parking brake manage to dead or dispirit the parking brake button.
3. The engine is shut off and the power is cut off. (Except for unique situations, such as the chauffeur does not leave the vehicle's line of sight and does not go beyond 1 minute).
4. Get rid of the key. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the look needs to be inspected, and gas, lubing oil and cooling water need to be added.
2. Examine the security performance of beginning, running and stopping.
3. Examine whether the lights and horn signals are full and reliable.
4. During the operation of the forklift, inspect whether the stress and temperature are normal.
5. After the forklift is running, the outside leak must additionally be examined and the seals must be changed in time.

Forklift Safety Operation Specifications.
1. You should inspect before leaving the vehicle;.
2. When you experience a person before you throughout driving, you must send out a signal at Electric Forklift Truck for Warehouse a distance of 5 m;.
3. The driving rate in the factory does not exceed 5 km/h;.
4. When driving, the nadir of the freight ought to be 0.3 m ~ 0.4 m in the air;.
5. The turning must not be as well sharp to prevent the tendency of " cost-free turning";.
6. Running up and down the slope must be slow-moving and consistent, and no activating the incline is allowed.
7. Do not drive throughout the gradient. When the slope is Electric Forklift Truck for Warehouse more than 10%, the vehicle must be driven in reverse when worsening;.
8. When the forklift workers bring the goods and progress, if they come across big or hefty products and go to the chauffeur's line of sight, they should take the reversing exercise
.
The "Eight Prohibitions" ought to be complied with in the procedure.
1. Single fork operation is not allowed.
2. It is not allowed to lift the goods for far away driving.
3. It is not permitted to grab the goods by handing over the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and various other harmful chemicals with forks.
5. It is not allowed to use inertia force to get the goods.
6. It is not permitted to use stopping pressure to exile round or easy-to-roll things.
7. It is not allowed to bring people to deal with the pallet or fork, and it is purely restricted to stand under the fork after the fork is raised.
8. Do not drive laterally on inclines
.
Vehicle parking is not allowed under the list below problems.
1. Curves, slim roadways, railway crossings;.
2. Areas with a longitudinal incline above 5%.
3. When there is an challenge on one side of the roadway, the contrary side of the area with the very same length as the barrier need to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844